STATUS is useful when you need to know how much memory the PC-2 has left for programming or how much
memory you are using at any time.
Example
will display the number of free bytes.
will display the number of bytes in use.
::T,'· Ti
I'::
.-::'
(ENTER)
._"
I
H
I
1_,,_'
.lo..
will display the memory address where the current program ends. Note that this address is actually one greater
than the actual address where the program ends.
':.~
····T!
I':'
-::
(ENTER)
'_' I H
l '_' '_'
'_'
will display the memory address where variables are stored. Note that this address is actually one location less
than the actual address where variables are stored.
will display the program line number that was being executed when program execution was halted.
83