Gprint - Radio Shack PC-2 TRS-80 Owner's Manual

position 93) but it wi II be truncated (chopped off) because it ran off the end of the Display.
(Note: You could achieve much the same result if you changed line 40 to: 40: CURSOR 16.)
GPRINT
Set Graphic Dots
GPRINT pattern delimiter pattern delimiter . ..
pattern is either a numeric expression between 0-127 decimal or a hexadecimal string which specifies a
combination of addressable dots on the Display.
delimiter is either a comma or semi-colon. If a comma is used, a blank column will be left between patterns;
if a semi-colon is used, columns will be printed next to each other.
Abbreviations: GP. GPR. GPRI.
Note: The PC-2 will recognize pattern numbers up to 255. However, since the high bit isn't displayed, numbers
greater than 127 will produce the same result as 0-127.
GPR I NT provides direct, programmable control over all of the dots in the Display.
The PC-2 Display is made up of 156 dots across (columns on the X-axis) and 7 dots down (rows on the Y-axis)
for a total of 1092 addressable dots.
66