Scott Eagle Attack Operating And Maintenance Instructions Manual page 5

The EAGLE ATTACK Thermal Imaging Camera may be equipped with an optional built-
in Thermal Video Recorder that records up to 250 minutes of continuous video from the
camera display. This video can be downloaded to a standard Personal Computer (PC)
using a USB 2.0 cable, SCOTT P/N 31002216, and Power Supply, SCOTT P/N 31002284.
An optional heavy duty three foot long retractable lanyard is available. An optional glare
shield and rail-mount flash light are also available.
The lens is covered by a replaceable high impact cover that is chemical, water, and
heat resistant.
An optional Glare Shield version of the Display Boot is available.
Instructions for all optional features are contained in this manual.
Use and maintenance of this instrument must be part of a complete thermal imaging
camera training program. The following procedures shall be used to operate and maintain
the unit prepared for emergency use. The unit shall be inspected after each use. There
are no user serviceable parts inside the camera except as outlined in this instruction. If
any malfunction is noted, remove the unit from service and return to SCOTT Safety or
an authorized SCOTT Safety Service Center for repair.
The EAGLE ATTACK Thermal Imaging Camera is not a night vision camera. Although
this device can significantly enhance vision in certain situations, the user must never
become wholly dependent on the unit for personal navigation. Always maintain aware-
ness of location and escape routes when using this device.
Do not use the EAGLE ATTACK Thermal Imaging Camera in situations where a
dedicated infrared thermometer, a pyrometer, or a radiometer is required.
READ AND UNDERSTAND THIS ENTIRE MANUAL. TRAINING IS REQUIRED BEFORE
USE OF THIS EQUIPMENT IN A HAZARDOUS SITUATION. THE TRAINING MUST
INCLUDE EXTENSIVE PRACTICE WITH THE THERMAL IMAGING CAMERA IN A
VARIETY OF ENVIRONMENTS AND A COMPLETE UNDERSTANDING OF HOW TO
INTERPRET THE THERMAL IMAGE. BECAUSE DIFFERENT BRANDS AND MODELS
OF THERMAL IMAGING CAMERAS MAY OPERATE DIFFERENTLY, ALWAYS UPDATE
TRAINING WITH EACH NEW PIECE OF EQUIPMENT. USE OF A THERMAL IMAGING
CAMERA WITHOUT PROPER TRAINING MAY PLACE THE USER AT HIGHER RISK IN
DANGEROUS SITUATIONS WHICH COULD RESULT IN SERIOUS INJURY OR DEATH.
NEVER BECOME WHOLLY DEPENDENT ON THE EAGLE ATTACK THERMAL IMAGING
CAMERA FOR PERSONAL NAVIGATION. IT IS NOT A NIGHT VISION CAMERA. ALWAYS
MAINTAIN AWARENESS OF LOCATION AND ESCAPE ROUTES WHEN USING THIS
DEVICE. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
EXPORT AND IMPORT
The international transport of this equipment and portions thereof is regulated under
United States export regulations and may be regulated by the import regulations of other
countries. If you have any questions or concerns regarding these regulations, contact
SCOTT at 1-800-247-7257 (or 704-291-8300 outside the continental United States).
QUESTIONS OR CONCERNS
If you have any questions or concerns regarding use of this equipment, contact your
authorized SCOTT distributor, or contact SCOTT at 1-800-247-7257 (or 704-291-8300
outside the continental United States) or visit our web site at www.scottsafety.com.
Page 3 of 32
WARNING
WARNING
P/N 595224-01 Rev E 7/12