Adjust The Volume; Watch Images From External Devices - JVC LCT1445-001A Instructions Manual

Remote control buttons and functions
Use the PR LIST:
1 Press the h h (Information) button to display the
h h
PR LIST
Pressing the h (Information) button changes the display
as follows:
PR LIST
PR ID
AV
01
02
03
04
05
06
07
08
09
TV OK
-10 +10
D0011-EN
2 Press the 5 5 and 6 5 5
Programme number (PR). Then press the a
button
• For Programme numbers (PR) with the CHANNEL
GUARD function set, the n (CHANNEL GUARD)
mark is displayed next to the Programme number
(PR) in the PR LIST.
• You cannot use the 6 buttons to choose a
Programme number (PR) with the CHANNEL
GUARD function set.
• Even if you try to choose a Programme number (PR)
with the CHANNEL GUARD function set, the n
(CHANNEL GUARD) mark will appear, and you
cannot watch the TV channel. To watch the TV
channel, see "CHANNEL GUARD" on page 27.
• If you do not have a clear picture or no colour
appears, follow the operation procedure "COLOUR
SYSTEM" (see page 23).
• The sound system is chosen automatically. However,
if you cannot hear the sound normally even when the
picture appears normally, choose the sound system
manually. Refer to the MANUAL on the "INSTALL"
menu (see page 29) for details of choosing the sound
system.

Adjust the volume

Press the r r q q buttons to adjust the volume.
r r q q
The Volume indicator appears and the volume changes as
you press the r q buttons.
• The headphone volume is adjusted with the
"HEADPHONE" menu (see page 25).
Muting the sound
Press the l l l l (muting) button to turn off the
sound.
Pressing the l (muting) button again restores the previous
volume level.
14
12 : 00
No indication
6 buttons to choose a 6 6
a a a

Watch images from external devices

Use the o o o button: o
Press the o o o o button to choose a VIDEO
terminal.
TV mode VIDEO modes
Programme
numbers
PR 1 – PR 99
or
• The leading character is changed from V to S (eg V2 is
changed to S2) when VIDEO-2, VIDEO-3, or VIDEO-5
are connected to the S terminal.
Use the p p p p p
p buttons:
p p
Press the p p p p p
p buttons to choose a
p p
terminal.
Use the PR LIST:
1 Press the h h (Information) button to display the
h h
PR LIST
2 Press the 5 5 and 6 6 buttons to choose a
5 5 6 6
VIDEO terminal. Then press the a
• The VIDEO terminals are registered after the
Programme number PR 99.
• If you do not have a clear picture or no colour
appears, change the colour system manually. See
"COLOUR SYSTEM" on page 23.
To return to a TV channel:
Press the b b button or the Number buttons. b b
To use the Programme number PR 0 (AV):
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number PR 0 (AV) allows
you to view images from the VCR. Set the VCR RF channel
to the Programme number PR 0 (AV) manually. For details,
see "EDIT/MANUAL" on page 29.
Pressing the o button changes the choice as follows:
TV mode
PR 0
Programme
numbers
PR 1 – PR 99
• The VCR RF channel is sent as the RF signal from the
VCR.
• Also refer to your VCR instruction manual.
or
or
VIDEO
a button a a
VIDEO modes
or
or
or