Child Lock Function - Kambrook KMO201 Instruction Booklet

Operating Your Kambrook Microwave Oven
4. Press the 'START/ +30 SEC' button
to save the setting as Memory
Function setting 2. The beeper will
sound once and will display "2".
The setting has now been saved
as Memory "2".
5.
Press the 'START/+30SEC' button
again to commence operation.
NOTE: If the electricity is not cut off,
the procedure will be saved. If it is,
the procedure needs to be reset.
To Recall the Memory
Function
In order to recall the saved cooking
programme, press the '0/MEMORY'
button twice,the LED Screen
will display "2", then press the
'START/+30SEC' button to commence
operation.
Multi-stage cooking
At most, 2 stages can be set for
cooking. In multi-stage cooking,
if one stage is defrosting, then
defrosting will be automatically
saved as the first stage.
NOTE: The 6 Auto cooking
programs can not be
programmed in to a multi-stage
cooking setting.
Example: To cook with 80%
microwave power "PL8" for 5 minutes
+ 60% microwave power "PL6" for
10 minutes. The cooking steps are as
following:
1. Press the 'SET TIME' button once,
then press '5', '0', '0' to set the
cooking time.
14
2. Press the 'POWER' once, then
press the '8' button to select 80%
microwave power "PL8".
3.
Press the 'SET TIME' button once,
then press '1', '0', '0', '0' to set the
cooking time to 10 minutes.
4. Press the 'POWER' button again,
then press the '6' button to select
60% microwave power "PL6".
5. Press the 'START/+30 SEC' button
to commence operation.
Inquiry Function
1.
The Inquiry Function allows for the
power level or time to be viewed
during operation.
The power level can only be
viewed when the microwave
oven is operating on a SET TIME
setting. To view the power level,
press the 'POWER' button and the
power level will be displayed on
the LED Screen for 3 seconds.
To view the time, press the
'CLOCK' button during operation
and the time will be displayed on
the LED Screen for 3 seconds.

Child Lock Function

1. To activate the Child Lock, press
and hold the 'STOP/CANCEL'
button for 3 seconds, there will
be a long "beep" denoting that
the microwave is entering into the
child-lock state; meanwhile, the
LED Screen will display:
continued