Pizza Function - Kambrook KMO201 Instruction Booklet

Frozen Vegetable Function
1. Press the 'FROZEN VEG' button
repeatedly until the weight of the
frozen vegetables to be cooked
appears on the LED Screen,
"150", "350", "500" grams will
be displayed in that order. For
example, to programme 150 grams
press the 'FROZEN VEG' button
once, "150" will be displayed.
2. Press the 'START/+30SEC' button
to commence operation, the
beeper will sound once. When
cooking is finished, the beeper
will sound five times and the LED
Screen will revert back to standby.
Hot Chocolate Function
1.
Press the 'HOT CHOC' button
repeatedly until the number of cups
to be heated appears on the LED
Screen, "1", "2", "3" (representing
cups) will be displayed in that order.
One cup is approximately 120ml.
For example, press the 'HOT CHOC'
button once, "1" will be displayed.
2. Press the 'START/+30SEC' button
to commence operation, the
beeper will sound once. When
cooking is finished, the beeper
will sound five times and the LED
Screen will revert back to standby.
Dinner Plate Function
1. Press the 'DINNER PLATE' button
repeatedly until the approximate
weight of the food to be re-heated
appears on the LED Screen,
"250", "350", "500" grams will
display in that order. For example,
press the 'DINNER PLATE' button
once , "250" will be displayed.
2. Press the 'START/+30SEC' button to
commence cooking, the beeper
will sound once. When heating
is finished, the beeper will sound
five times and the LED Screen will
revert back to standby.

Pizza Function

1. Press the 'PIZZA' button
repeatedly until the approximate
weight of the pizza to be cooked
appears on the LED Screen,
"100", "200", "400" grams will
be displayed in that order. For
example, press the 'PIZZA' button
once, "100" will be displayed.
2. Press the 'START/+30SEC' button
to commence cooking, the
beeper will sound once. When
cooking has finish, the beeper will
sound five times and then the LED
Screen will revert back to standby.
To Set the Memory Function
The Memory Function allows
for three programmes to be set and
saved in order to be recalled and
used again. The programmes can be
multi-staged, using different cooking
programmes and power levels.
Example: Set the following procedure
as the second memory, with 80%
microwave power for 3 minutes and
20 seconds.
NOTE: Only one or two stages
can be set on a single memory
programme.
The steps are as follows:
1.
Press the '0/MEMORY' button
twice, stop when the LED Screen
displays "2".
2.
Press the 'SET TIME' button once,
then press '3', '2', '0' in order.
3.
Press the 'POWER' button once.
"PL10" will be displayed on
the LED Screen, then press the
'8' button, "PL8" will now be
displayed on the LED Screen.
13