Before First Use; Setting The Clock; Kitchen Timer; The Microwave Oven - Kambrook KMO201 Instruction Booklet

Operating Your Kambrook Microwave Oven

Before First Use

Before first use remove all promotional
stickers and packaging material.
Carefully unpack the microwave
oven and keep all the packing
material until all the parts of the
microwave oven have been found
and the appliance has been
assembled. It is recommended to
keep all the packing material in a
safe place in case you wish to repack
the product for shipping purposes.
To remove any dust that may have
accumulated during packing, wash
the roller ring and glass turntable in
warm soapy water, rinse in clean
water then dry thoroughly. Wipe the
interior and exterior of the microwave
oven with a soft, damp cloth then
dry thoroughly.
WARNING: Do not
immerse any part of your
microwave oven in water
or any other liquid.
Assembling the Glass
Turntable and Turning "On"

the Microwave Oven

1.
Place the roller ring into position
in the indented space in the oven
cavity base.
2. Insert the glass turntable into
position, matching the indents on
the base of the glass turntable
with the indents in the shaft
located in the centre of the oven
cavity base.
3. Plug the power cord into a 230V
or 240V power outlet. Switch on at
the power outlet. The microwave
oven is now "On".
10

Setting the Clock

1.
Press the 'CLOCK' button, "00:00"
will be displayed on the LED Screen.
2. Using the number pad, enter the
current time. For example, if the
time is 12:10 now, press '1', '2', '1',
'0' in that order.
3. Press the 'CLOCK' button again
to finish setting. ":" will now flash
indicating that the time has
successfully been set.
NOTE: The microwave oven
features a 12 hour clock. To set the
time, a valid time between 1:00
and 12:59 needs to be entered.
NOTE: In the process of clock
setting, if the 'STOP/CANCEL'
button is pressed or if there is no
operation within 1 minute, the
oven will automatically go back
to standby.

Kitchen Timer

1.
Press the 'KITCHEN TIMER' button,
the LED Screen will display
"00:00" flashing.
2.
Using the number pad, enter the
required countdown timer time
(the maximum time is 99 minutes
and 99 seconds).
3.
Press the 'START/+30SEC' button to
confirm the time and commence
the countdown.
4. When the timer has counted down
to "0", it will beep 5 times. The LED
Screen will revert back to standby.
NOTE: The Kitchen Timer is only
a countdown mechanism, the
microwave will not cook on
this setting.