JVC I'Art 0406TNH-II-IM User Manual page 15

Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or Dolby Digital.
OPTICAL OUT
DIGITAL
AUDIO
1) Connect the optical cable from the back of the TV to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select "PCM" or "Dolby Digital" on "Optical Out"
in Sound Adjust. See page 39.
• Refer to your owners manual on using your amplifier.
TV Rear Panel
Amplifier
Quick Setup
15