Getting Started; Setting Up The Mimiocapture Tray - Dymo MimioClassroom User Manual

Getting Started

MimioCapture links directly to your MimioTeach for seamless integration with
MimioStudio software. Before you can begin capturing digital ink, you must first set up
your MimioCapture tray, MimioCapture pens, MimioCapture eraser, and MimioStudio
Notebook.

Setting Up the MimioCapture Tray

The MimioCapture tray is powered using the USB cable and power adapter that were
included with your MimioTeach. The MimioTeach bar connects to the MimioCapture tray
using the connector bar that was included with your MimioCapture.
To connect
1. Remove the MimioTeach bar from the whiteboard.
2. Unplug the USB cable from the MimioTeach bar.
3. Plug the USB cable into the USB port on the MimioCapture tray.
Getting Started
45