Using Mimioteach; Using The Mimioteach Stylus - Dymo MimioClassroom User Manual

1. If the calibration screen does not appear when you start Interactive mode, do one of the
2. Press the MimioTeach stylus down on the whiteboard at the center of each of the nine

Using MimioTeach

You can use the MimioTeach bar and stylus in MimioStudio Interactive mode to deliver
lessons and presentations. In MimioStudio Interactive mode, you control the movement of
the cursor on your screen with the MimioTeach stylus, much like you would with a mouse
at your computer.
You can also use the various presentation tools found in MimioStudio Tools to focus your
audience on a specific area of the screen by displaying only certain parts of the screen. And,
you can annotate the screen with the drawing tools available in MimioStudio Tools using
the Screen Annotation feature.

Using the MimioTeach Stylus

In Interactive mode, the MimioTeach stylus can be used to control your desktop and interact
with applications on your computer from your whiteboard.
The following table describes how to use the MimioTeach stylus to control your desktop
from the whiteboard.
To execute
Left mouse click
Double left mouse click
Right mouse click
Hover
To change the functions of the MimioTeach stylus buttons, see Adjusting the Interactive
following:
Start MimioStudio Tools, click the Interactive button,
l
Recalibrate.
Press the Interactive button, , on your MimioTeach bar.
l
Start MimioStudio Preferences, select Interactive, and then click Calibrate.
l
calibration targets.
Make sure to hold the stylus perpendicular to the writing surface as you click.
The calibration target disappears and the next calibration target appears.
When the calibration screen disappears, Interactive mode is enabled.
Do this
Click in the projected area at the desired location with the tip of the stylus.
Quickly click twice in the projected area at the desired location with the tip of
the stylus.
Press the B button on the stylus, and then click in the projected area at the
desired location with the tip of the stylus.
1. Hold the stylus at the desired location, staying as close to the whiteboard
2. Press the B button on the stylus.
3. Move the stylus to the desired location.
4. Release the B button on the stylus.
as possible without touching it.
Using MimioTeach
, and then click
.
33