Antenna Cable; Satellite Dish - Philips 55PUS7909 User Manual

2.5

Antenna Cable

Insert the antenna plug firmly into the Antenna socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6

Satellite Dish

One Tuner
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV. If you only have 1 cable available, the
channel you are recording is the only channel you can watch.
Connect the cable from the satellite dish directly to the SAT 1
connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
During the satellite installation, select One Tuner.
Two Tuners
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV.
Connect the first cable from the satellite dish directly to the SAT
1 connection and connect the second cable to SAT 2. Use a
coaxial cable fit for connecting a satellite antenna dish. Make sure
your satellite dish is perfectly aligned before you start the
installation.
During the satellite installation, select Two Tuners.
Unicable or MDU
If you use a Unicable system, connect the cable to the SAT
1 connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
During the satellite installation, select Two Tuners and
later Unicable.
7