Ci+ Cam With Smart Card - Philips 55PUS7909 User Manual

brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink.
Example HDMI CEC branding names are property of their
respective owners.
Operate Devices
To operate a device connected to HDMI and set up with
EasyLink, select the device - or its activity - in the list of TV
connections. Press  SOURCES, select a device connected to
an HDMI connection and press OK.
Once the device is selected, the TV remote control can control
the device. However the keys  and  OPTIONS and some
other TV keys, like  Ambilight, are not forwarded to the
device.
If the key you need is not on the TV remote control, you can
select the key in the Options menu.
Press  OPTIONS and select Controls in the menu bar. On
the screen, select the device key you need and press OK.
Some very specific device keys might not be available in the
Controls menu.
Only devices that support EssyLink Remote Control function
will respond to the TV remote control.
EasyLink Settings
The TV comes with the EasyLink settings switched on.
EasyLink
To switch off EasyLink completely...
1 - Press  and press  (left) for Setup.
2 - Click General Settings > EasyLink and click EasyLink one
step further.
3 - Click Off.
4 - Press  BACK repeatedly if necessary, to close the menu.
EasyLink Remote Control
If you want devices to communicate but you don't want to
operate them with the TV remote control, you can switch off
EasyLink remote control separately.
In the EasyLink settings menu, select EasyLink Remote Control
and select Off.
4.3

CI+ CAM with Smart Card

CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV operators in your region. These
programmes are scrambled by the TV operator and
descrambled with a prepaid CI+ module.
Digital TV operators provide a CI+ module (Conditional Access
Module - CAM) and an accompanying smart card, when you
subscribe to their premium programmes. These programmes
have a high level of copy protection.
Contact a digital TV operator for more information on terms &
conditions.
One Smart Card
Digital TV operators provide a CI+ module (Conditional Access
Module - CAM) and an accompanying smart card, when you
subscribe to their premium programmes.
Insert the smart card into the CAM module. See the instruction
you received from the operator.
To insert the CAM in the TV...
1 - Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
2 - While looking at the back of the TV, with the front of the
CAM facing towards you, gently insert the CAM into the slot
COMMON INTERFACE 1.
3 - Push the CAM in as far as it will go. Leave it in the slot
permanently.
When you switch on the TV, it may take a few minutes before
the CAM is activated. If a CAM is inserted and subscription fees
are paid (subscription methods can differ), you can watch the
scrambled channels supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If you
remove the CAM, you will no longer be able to watch the
scrambled channels supported by the CAM.
13