Network - Philips 55PUS7909 User Manual

Audio Description
Switch On
Digital TV channels can broadcast special audio commentary
describing what is happening on screen.
To be able to set the visually impaired audio and effects, you
have to switch on Audio Description first.
Also, before you can switch on Audio Description, you have to
switch on Accessibility in Setup.
With Audio Description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available)...
1 - While watching a TV channel, press  OPTIONS.
2 - Select Accessibility > Audio Description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio Language and look for an
audio language marked with a .
Mixed Volume
You can mix the volume of the normal audio with the audio
commentary.
To mix the volume...
1 - Press  and press  (left) for Setup.
2 - Select Accessibility > Audio Description > Mixed Volume
and press OK.
3 - Use the arrows up and down to set the slider bar.
4 - Press OK to confirm.
5 - Press  BACK repeatedly if necessary, to close the menu.
If an audio language with added audio commentary is available,
you can also find this setting in  OPTIONS > Accessibility >
Mixed Volume.
Audio Effect
Some audio commentary can hold extra audio effects, like
stereo or fading sound.
To switch on Audio effects (if available)...
1 - Press  and press  (left) for Setup.
2 - Select Accessibility > Audio Description > Audio Effects
and press OK.
3 - Select On and press OK.
4 - Press  BACK repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words
which are spoken.
To switch on these subtitles (if available) . . .
1 - Press  and press  (left) for Setup.
2 - Select Accessibility > Audio Description > Speech and
press OK.
3 - Select Descriptive or Subtitles and press OK.
4 - Press  BACK repeatedly if necessary, to close the menu.
24.8

Network

For more information, press the colour key
look up Network.
24.9
Installation Antenna/Cable
Update Channels
Automatic Channel Update
If you receive digital channels, you can set the TV to
automatically update these channels.
Once a day, at 6 AM, the TV updates the channels and stores
new channels. New channels are stored in the Channels List and
are marked with a  . Channels without a signal are
removed. The TV must be in Standby to automatically update
channels. You can switch off Auromatic Channel Update.
To switch off the automatic update...
1 - Press  and press  (left) Setup.
2 - Click Antenna/Cable Installation > Automatic Channel
Update and click Off.
3 - Press  BACK repeatedly if necessary, to close the menu.
When new channels are found or if channels are updated or
removed, a message is shown at TV start up. To avoid this
message to appear after every channel update, you can switch it
off.
To switch off the message...
1 - Press  and press  (left) Setup.
2 - Click Antenna/Cable Installation > Channel Update
Message and click Off.
3 - Press  BACK repeatedly if necessary, to close the menu.
In certain countries, the Automatic channel update is done while
watching TV or on any moment when the TV is in Standby.
Manual Channel Update
You can always start an channel update yourself.
To start a channel update manually...
1 - Press  and press  (left) Setup.
76
 Keywords and