Low Voltage Control Systems - Fantech 405335 Installation Manual

Heat recovery ventilator
Table of Contents

Advertisement

Available languages

Available languages

Low Voltage Control Systems

* Please see instruction manuals for individual controls for proper wiring and set up of control systems.
CENTRAL CONTROLS
These control options can only be used individually
CONTROLS
ECO-Touch
• Our most complete, yet easy to use con-
• Sleek design with backlight touchscreen LCD
• ECO mode selects the best operating mode and
• Set preferred indoor relative humidity range and
• No battery to replace, all programmed settings
• Maintenance reminder indicator
• Error code messages reduce troubleshoot-
EDF1
• Press button once for continuous LOW speed
• Press button twice and the unit will cycle 20
• Press button a third time and the system will
EDF1R
• Press button once for continuous LOW speed
• Press button twice and the unit will cycle 20
• Press button a third time and the system will
AUxILIARY CONTROL
These controls can be paired
RTS2
• 20- minute timer with LED light
• Boosts system to high speed with the touch
• Up to 5 can be used in one system
• Use in bathroom, kitchen, laundry room
RTS5
• 20/40/60 minute timer with LED light
• Boosts system to high speed with the touche
• Up to 5 can be used in one system
• Use in bathroom, kitchen, laundry room
MDEH1
• Rotary dial Dehumidistat
• Multiple units can be used
• We recommend setting the relative humidity
FEATURES
trol system
speed for the season, minimizing energy use
associated with ventilation
ventilation mode for day and night conditions
are retained during power outage
ing time
minutes ON/ 40 minutes OFF and repeat
run continuously on HIGH speed
minutes ON/ 40 minutes OFF and repeat
run recirculation on HIGH speed
of a button
of a button
above 80% during the summer
CONNECT TO
1. Ensure that unit is not
W
2. Recirculation mode is
W
W
+
T
T -
+
T
T -
D
plugged when connect-
ing the control
only available with the
"R" suffix at the end of
the model number.
The wiring connectors
can be removed for
easier connection.
*Maintain polarity
between control
and HRV
(+ → + ; - → -)
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents