Deck Mechanism Adjustment; Tools And Fixtures For Svc; Install Process - Toshiba SD-2715 Service Manual

DECK MECHANISM ADJUSTMENT

1. Tools and Fixtures for SVC

• For SVC Program Down-Load
Fig.1. Printer Cable
• For T-Skew and R-Skew Adjustment
Fig.5. L-Wrench(3mm)

2. Install Process

1. Connect Fig. 1, 2, 3 as Fig. 7.
2. Plug out the Power cord of DVD set.
3. Connect FFC Cable(Fig.2) to the Connector on DVD Set(Fig.8)
4. Connect Printer Cable(Fig.1) to the P.C.Printer Port (LPT1).
5. Plug in the DVD Power cord.
6. Press the Menu key on Remocon.
7. Confirm No.1 LED(RED Color) of Jig board is ON. (Fig.9)
8. Perform The S/W for Down-load at P.C.
9. Open the Program File for Adjusting(Fig.10)
10. Click the Down-load Icon and perform Program Down-load.
11. Displayed remaining time.
12. Confirm LED No.1(RED) and No.2(GREEN) is ON.
13. Plug out the DVD Set Power cord.
14. Disconnect the FFC Cable.
ROM-DOL
File Help
Rom Size
Fig.10. Adjusting Program File Open
Fig.2. FFC Cable (15 pin)
Fig.6. RCA Jack
Port
16MBit LPT1
8M Bit LPT2
Manual
Fig.3. Jig Board
Fig.7. Connecting Method
FILE OPEN
PROGRAM START
PROGRAM EXIT
4-5
Fig.4. Deviation Disc (0.8mm)
Fig.8. FFC Cable Connecting
Fig.9. Jig Board LED Condition