Motorola LS6000B-U Quick Manual page 2

Insert the plug on the free end of the Communications Cable into the
appropriate connector on the host as below described:
USB Connection
Connect with host
1. Please switch on
first time before install driver.
2. Install the software "PL-2303 Driver Installer.exe" to the host system
for LS6000B-U series.
3. Connect scanner cradle to the USB port on the host
system. Once link the red led light on scanner will off.
In case it still keeps ON please re-plug the USB
connector again and click on reset button shown on
picture. That circle on red color.
4. Go to My Computer One click right button of mouse
Device Administrator
5. Choose Prolific USB-to-Serial Com Port, and see identify COM number,
ex. COM 5.
6. Go to START Programs
Hyper Terminal.
Detail set up on the Hyper Terminal, please see at the Figure 1 to Figure 3.
Figure 1
(RS232 data format)
and charging scanner for 6 hours at
Administrate
Connect Port (COM and LPT).
Accessories Communications
2
Figure 2
Figure 3
Step 1: key-in a file name
Step 2: select the first
Step 3: press OK
No need to key-in
Step 1: key-in the identify
Step 1: key-in the identify
COM number, ex.
COM number
COM 5
Step 2: press OK
Step 2: press OK
Row 1: key-in "9600"
Row 2: key-in "8"
Row 3: key-in "none"
Row 4: key-in "1"
Row 5: key-in "none"
Press OK
3