Keys And Features - Saitek SmartCharger Instruction Manual

KEYS AND FEATURES

1. AC-DC ADAPTER SOCKET
2. 1.2V Ni-Cd/Ni-MH BATTERY RECHARGING SLOTS (4) Insert from
one to four AAA, AA, C, D batteries or up to two prismatic batteries.
3. 9V BATTERY RECHARGING SLOT Insert a 9V Ni-Cd/Ni-MH battery
(6F22/1604). Note that C and D size batteries may not be placed into
slots 2 and 3 while you are recharging a 9V battery.
4. DISCHARGE KEY Skip the Intelligent Discharge System (IDS) by
pressing this key. Conversely, to force the SmartCharger to switch to
IDS mode while in Soft-Start mode, press and hold the DISCHARGE key
for around three seconds
5. ANALYZE KEY Press to activate the Battery Checking function on a
1.2V rechargeable battery. Insert a single battery into a 1.2V slot,
leaving the lid open as you do so. Press the ANALYZE key. The
SmartCharger will take approximately ten seconds to evaluate the
condition of the battery.
The estimated level of energy left along with the battery voltage
(Voltage indicator) will appear on the LCD. The estimated level of