Troubleshooting Guide - Saitek SmartCharger Instruction Manual

TROUBLESHOOTING GUIDE

SYMPTOMS POSSIBLE CAUSES
The unit doesn't work.
Wrong AC-DC adapter.
Defective AC-DC adapter.
A battery is inserted
Loose or bad contact.
and the ANALYZE key
is pressed, but the
charger does not
analyze.
Lid closed.
Battery open circuited.
9V battery inserted only.
Defective unit.
TROUBLESHOOTING GUIDE
ACTION TO TAKE
Use with supplied
The charger does not
adapter only.
leave the "analyze"
mode after 10
Replace it with a new
Saitek adapter that is
animation is still
specifically for this
running).
charger.
The charger does not
Reinsert the battery
start to charge even
and secure it firmly.
though the battery is
Press the ANALYZE
inserted and the lid is
key again.
closed.
Open the lid and press
the ANALYZE key
again.
Remove the bad
battery and insert
another battery.
Press the ANALYZE
key again.
Only the 1.2V channel
has the analyzing
function.
Contact your local
distribution centre.
SYMPTOMS POSSIBLE CAUSES
ANALYZE key held.
Defective unit.
Loose clamping of
battery.
Lid not closed firmly.
Battery inserted with
wrong polarity.
Dirty 1.2V contacts
ACTION TO TAKE
Release the ANALYZE
key.
Contact your local
distribution centre.
Secure the battery
firmly with the sliding
contact.
Make sure that the lid
is closed and locked in
place by pressing just
above the lid button.
Correct the polarity.
Clean the contact with
a soft cloth.