For 4 Way Cassette - Samsung 1 way cassette type Installation Manual

For 4 Way Cassette

8
NASA_PANEL_IM_EN_03683A(1).indd 8
PC4NUSKAN / PC4NUSKEN / PC4NBSKAN
Accessories
Bolt(M5XL35 MACHINE)
(4)
If the supplied bolt is lost, you may purchase M5 machine bolt
(with length of the thread more than 20mm long) and a circular
CAUTION
washer from any retail hardware store to replace the lost bolt.
1
Open the electrical component box cover.
• After untightening the screws, slide the electrical component box cover
in the direction of the arrow as shown in the figure and pull it down.
2 Push the switch type handles inward and pull the grille to open.
• Handles are located on the left and right side of the Samsung logo on
the grille.
• You may have to open the air flow blades first in order to find the
handles.
There is no need to detach the grille for the installation of the panel.
However, if you want to detach the grill follow the instructions below.
Detach the front grille
1) Remove the safety clips first.
2) Pull the green switch on the hinge part
towards the sign and press and pull
the hinge part to remove the grille.
( There are two hinges on the grille and
you must apply this step on both of them
to remove the grille.)
3) For attaching the front grille, reverse
the procedure above.
Installation manual
(1)
2013-01-14 오후 8:35:40