Samsung 1 way cassette type Installation Manual page 8

5 Install the air flow blade.
5-1 Fix the right part of the blade to the indoor unit.
If the direction is incorrect, the blade will not be inserted smoothly.
Check that prominence of the right side has a small rectangular
CAUTION
groove.
5-2 Fix the other side of the blade.
5-3 Fix the middle part of the blade by pushing slightly the middle tab
in the indoor unit.
6
Connect cables between the electrical component box and panel.
6-1 Detach 2 screws from the electrical component box.
6-2 Connect the connector of the panel to the electrical component box.
6-3 Reassemble the electrical component box.
Be careful about the color of cables not so that they will be mixed up.
CAUTION
7 Check out that the panel is fixed to the indoor unit.
7-1 Fix bolts tightly between the panel and the surface of the ceiling.
If the panel is installed incorrectly, air may leak.
CAUTION
7-2 Check it out not to cause air leaks.
Must fit tightly against the
ceiling without any gap.
CAUTION
If there is a gap between the panel and the ceiling, adjust the height of
the indoor unit. Unless adjust the height, dew may form and drip from
the gap.
8
Reinstall the front grille in the reverse way.
Do not close any discharge area of panel.
CAUTION
NASA_PANEL_IM_EN_03683A(1).indd 7
Air leaks
Dew
Dirts
Insulation
Indoor unit
Panel
Must fit tightly against the
ceiling without any gap.
7 7
2013-01-14 오후 8:35:39