Samsung 1 way cassette type Installation Manual page 5

For Slim 1 Way cassette
Ceiling sleeve
Base bolt
Hanger bracket
Ceiling
Hook
6 fixing screws
4
NASA_PANEL_IM_EN_03683A(1).indd 4
PC1NUPMAN
Accessories
Please check the components below before you install the product.
M4x25 Installation
bolt manual
After the installation, the installer should explain to users how to
use the product.
CAUTION
Installing the product
Handle the panel carefully.
 Do not lean the panel against the wall and do not place the
CAUTION
panel on a projecting object. Otherwise, scratches might form on
the surface of the panel.
 Be careful when gripping the air intake panel for installation.
1 Fix 2 hooks of the panel on both sides of the indoor unit.
 When the hooks of the panel cannot be fixed to the indoor unit,
NOTE check whether the step motor covers that are at the left or right
NOTE
inside the panel (2 places) are touching the base bolt.
 When the length of the base bolt is 30mm for hanger hole, the
step motor cover will not touch the base bolt.
2
Tighten the panel fixing screws.
2-1 Tighten the panel fixing screws temporarily.
2-2 Close the gap between the panel and the ceiling by adjusting the
position of the panel and then tighten the screws completely.
3
Open the filter by pressing the two [PUSH] signs on the filter.
Screw Tightening torque
12.0 ~ 15.0 1.2 ~ 1.5
M4
kgf•cm N•m
2013-01-14 오후 8:35:34