PowerTek 16-20 P Operation & Maintenance Manual page 4

SAFETY
1. Read the entire owner's manual carefully before operating the stump
grinder. Also, read the entire Engine Operator's Handbook. Familiarize
yourself with the, proper use of the Stumper. Know the controls and how to
stop quickly.
2. Do not allow children to operate the stump grinder. Do not allow adults to
operate the stump grinder without proper instruction- Do, not allow anyone to
operate the stump grinder who is not acquainted with the Safety Instructions.
3. Be especially watchful of children and pets darting into the operating area
and/or danger zone.
4. Wear protective clothing-long pants and heavy work boots as well as ear
and eye protection while operating the Stumper.
5. Keep your mind and eyes on the machine while operating it. Do not let others
distract you.
6. Check the stump grinder for any loose parts before operating.
7. Never place hands or feet anywhere near the cutter blade. The blade is larger
than it appears when it is operating.
8. Make sure you are aware of the location of any pipes (water, gas, electrical,
etc.) above or below the ground.
9. Clear the work area of all foreign objects such as sticks stones wires, etc.
10. Turn off clutch before moving
11. Never operate the unit without the safety guards in place and operating
properly. Keep equipment in good working condition.
12. Take all possible precautions when leaving unit unattended. Stop engine
and remove ignition key to prevent unauthorized use.
13. When refueling machine: shut off engine, do not smoke or allow any hot or
burning material near.
14. Before removing or replacing teeth or belts, or before performing any
maintenance: shut off engine and wait for all moving parts to stop,
disconnect spark plug wire' and remove key.
15. Stability: The stump grinder has a narrow wheelbase and can become
unstable under adverse conditions. Always go straight up or down on steep
hills. Avoid steep side angles. When grinding avoid dropping one wheel into a
hole to avoid a side tip of the unit.
16. When stump grinder is being transported on a trailer or in a truck make sure
the machine is securely fastened to prevent property damage.
3
POWERTEK