Directional Control - PowerTek 16-20 P Operation & Maintenance Manual

OPERATION POWERTEK
DIRECTIONAL CONTROL (SP)
The drive system consists of a hydrostatic transmission and differential axle assembly. The
hydrostatic control lever at the handle bar, controls forward and reverse, and automatically
returns to neutral or stop when released. Always 'feather" the finger control lever-easing it into
the direction desired. Pushing the control lever forward propels the grinder forward, pulling the
control lever back reverses the grinder (Fig. 4).
!
! CAUTION
Pushing the hydrostatic lever full forward may cause stump grinder to jump forward,
injury or property damage may occur. Use light pressure on hydrostatic lever to
maintain proper control of stumper.
(Fig. 4)
9