Adjust The Volume; Displaying The Current Time - JVC AV-32H5SA Instructions Manual

Remote control buttons and functions
To return to a TV channel:
Press the b button, the 6 buttons or the
Number buttons.
To use the Programme number PR 0
(AV):
When the TV and VCR are connected only
by the Aerial cable, choosing the Programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the Programme number PR 0
(AV) manually. For details, see "EDIT/
MANUAL" on page 28.
Pressing the o button changes the
choice as follows:
TV mode
Programme
PR 0
numbers
PR 1 – PR 99
• The VCR RF channel is sent as the RF
signal from the VCR.
• Also refer to your VCR instruction
manual.

Adjust the volume

Press the 5 buttons to adjust the
volume.
The Volume indicator appears and the
volume changes as you press the q
buttons.
Muting the sound
Press the l (muting) button to
turn off the sound.
Pressing the l (muting) button again
restores the previous volume level.
14
EXT modes
EXT-1 EXT-2
EXT-4 EXT-3

Displaying the current time

You can display the Current Time on the
screen.
Press the h (Information) button to
display the current time
Pressing the h (Information) button changes
the display as follows:
PR LIST
PR ID
AV
1 BBC1
2
3
4
5
6
7
8
9
TV OK
D0011 -EN
• This TV uses teletext data to set the
current time. If the TV has not received a
TV channel that has teletext programmes
since it was turned on, the time display is
blank. To view the current time, choose a
TV channel that has teletext programmes.
• When watching videos, an incorrect
current time is sometimes displayed.
12 : 00
No indication