Sound; Display - Panasonic Diga DMR-EX99V Operating Instructions Manual

Changing the unit's settings

Sound

(All factory default settings are indicated with underlined text.)
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
[On]
Bilingual Audio Selection
(Analogue broadcast only)
Select whether to record the main or secondary audio type when:
≥Recording or copying to a DVD-R, DVD-R DL, DVD-RW (DVD-
Video format), +R, +R DL and +RW.
≥"Rec for High Speed Copy" is set to "On".
≥Recording or copying sound in LPCM (
XP Recording").
[M 1]
≥You cannot select the audio on this unit when recording from an
external source, such as when copying from a video cassette
recorder. Select the audio on the other equipment.
Digital Audio Output
Change the settings when you have connected equipment through
this unit's Digital Audio Output terminal (
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings below if
the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
[On] Signals are converted to 48 kHz. (Choose when the
connected equipment cannot process signals with a
sampling frequency of 96 kHz.)
[Off] Signals are output as 96 kHz. (Choose when the
connected equipment can process signals with a
sampling frequency of 96 kHz.)
Dolby Digital
§
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the signal.
Select "PCM" if this unit decodes the signal and outputs it as 2 channels.
≥Not making the proper settings may result in noise.
[Bitstream] When connected to equipment with a built-in Dolby
Digital decoder.
[PCM] When connected to equipment without a built-in
Dolby Digital decoder.
DTS
§
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the
signal.
Select "PCM" if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream] When connected to equipment with a built-in DTS
decoder.
[PCM] When connected to equipment without a built-in
DTS decoder.
MPEG
§
Select how to output the signal.
Select "Bitstream" if the connected equipment decodes the signal.
Select "PCM" if this unit decodes the signal and outputs it as 2
channels.
≥Not making the proper settings may result in noise.
[Bitstream] When connected to equipment with a built-in
MPEG decoder.
[PCM] When connected to equipment without a built-in
MPEG decoder.
Refer to the operating instructions for connected devices to verify
§
whether or not they can decode each of the audio formats.
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP mode.
[Dolby Digital] ( 96) [LPCM] (
≥The picture quality of LPCM recordings may be lower than that of
normal XP mode recordings.
≥The audio recording becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
≥When recording a bilingual broadcast, select the type of audio in
advance from "Bilingual Audio Selection" (
VQT2J46
76
[Off]
below, "Audio Mode for
[M 2]
81, 82).
96)
above).

Display

(All factory default settings are indicated with underlined text.)
Language
Choose the language for these menus and on-screen messages.
[English] [Deutsch]
[Español]
On-Screen Messages
Choose the approximate time until the digital channel information
screen ( 19) disappears automatically.
The length of time the control panel (
be changed, but "Off" does not work.
[Off] (The digital channel information is not displayed.)
[3 sec.] [5 sec.]
Grey Background
Select "Off" if you do not want to have the unit show the grey
background when tuner reception is weak.
[On] [Off]
Unit's Display
Changes the brightness of the unit's display.
This setting is fixed with "Automatic" if you set "Power Save in
Standby" to "On" or "On Timer" (
[Bright] [Dim]
[Automatic] The display turns dark during play and disappears
when the unit is turned off. When "Power Save in
Standby" is activated (
while in standby mode is reduced.
Pause Live TV Icon
Select "Off" if you do not want to have the unit show the on-screen
icon while using the Pause Live TV function.
[On] [Off]
Screen Saver
[On] When this unit is not operated for approximately 5 minutes
while the screen is being displayed, the screen saver is
displayed. To return to the previous screen, press [OK].
[Off]
FUNCTION MENU Display
[On] When the unit is turned on, the FUNCTION MENU will be
displayed. ( 9)
[Off]
[Français] [Italiano]
47) is displayed can also
[7 sec.] [10 sec.]
78).
78), power consumption