Radio - Led Lights; How To Transmit And Receive On A Tmr - Motorola TMR 2 User Manual

Radio – LED Lights
Both the portable and mobile radios have a series of red, yellow and green
LED lights that indicate various items on the radio which are as follows:
LED LIGHTS
Mobile
Solid
Flashing
Portable
Solid
Flashing
Flashing
How to Transmit and
Receive on a TMR
• Select the desired talk group on the radio.
• Listen for ongoing conversations; if the channel becomes clear,
proceed with your call.
• Lift the mic, press and hold the PTT button to transmit and wait for
the "Talk Permit" tone.
• If you hear three quick tones (go ahead tones), proceed with your
message. Remember keep the microphone 1-2" from your mouth.
• If you hear a busy tone all trunked channels are in use.
• Release the PTT button and wait for the three quick tones. Within
three seconds of hearing these tones, press and hold the PTT button
to transmit your message.
• Release the PTT button to receive (listen).
• If another user is transmitting on the talkgroup and you attempt to
transmit, you will be alerted by a "bonk." Simply wait until the user
has completed their message and proceed with yours.
RED
Radio is transmitting
Radio is trying
to access system
Radio is transmitting
Low Battery (lights
while transmitting)
Intermittent fl ashing
- trying to connect to
a TMR site or re-affi liat-
ing to a site
YELLOW
Indicates traffi c on
a simplex channel
N/A
N/A
N/A
N/A
GREEN
Self-test being
performed
N/A
Self-test being
performed
N/A
N/A
9