Fostex APPENDIX Operation Manual
  1. Manuals
  2. Brands
  3. Fostex Manuals
  4. Recording Equipment
  5. APPENDIX
  6. Operation manual
Fostex APPENDIX Operation Manual

Fostex APPENDIX Operation Manual

With the model 8345 tc/sync card installed
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
APPENDIX
<Operation manual for the recorder with the Model 8345 TC/SYNC card installed>
This appendix is the operation manual for the recorder with the Model 8345
TC/SYNC card installed. If you use the recorder with the Model 8345 installed,
read this appendix, instead of the operation manual included in the Model
8345 package.
<Installation of the optional card>
The TC/SYNC card should be installed into the recorder at a FOSTEX service
station. Do not try to install the card by yourself. Ask your local FOSTEX dealer
for the installation after purchasing the Model 8345.
<Notes when requesting the installation>
There is the possibility of damaging the hard disk when transporting the re-
corder. Before transporting the recorder to our service department for the
installation of the TC/SYNC card, remove the hard disk from the recorder. Be
sure to keep the removed hard disk carefully.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APPENDIX and is the answer not in the manual?

Questions and answers

Related Manuals for Fostex APPENDIX

Summary of Contents for Fostex APPENDIX

  • Page 1 <Installation of the optional card> The TC/SYNC card should be installed into the recorder at a FOSTEX service station. Do not try to install the card by yourself. Ask your local FOSTEX dealer for the installation after purchasing the Model 8345.

  • Page 2: Table Of Contents

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Contents of Appendix Names and Functions.................3 Introduction..................4 Additional features................4 Operations for the additional SETUP menu........4 “Ref. TC ?” menu setting...............4 “Clock Sel ?” menu setting..............5 “Sync Preset ?” menu setting..............5 “Virtual LTC ?”...

  • Page 3: Names And Functions

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Names and Functions ANALOG INPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBV ] ANALOG INPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBv ] ANALOG OUTPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBv ]...

  • Page 4: Introduction

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Introduction Operations for the additional SETUP menu The Model 8345 is a TC/SYNC card designed as an "Ref. TC ?" menu setting option for digital multitrack recorders.

  • Page 5: Clock Sel ?" Menu Setting

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) "Clock Sel ?" menu setting "Sync Preset ?" menu setting Execute step 1 and 2 in "Ref. TC ?" menu setting" Execute step 1 and 2 in "Ref. TC ?" menu setting"...

  • Page 6: Virtual Ltc?" Menu Setting

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) "Virtual LTC?" menu setting "Offset Disp?" menu setting Execute step 1 and 2 in ""Ref. TC ?" menu setting" Execute step 1 and 2 in ""Ref. TC ?" menu setting"...

  • Page 7: Generator Setup

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Generator Setup By installing the Model 8345 TC/SYNC card into the recorder, the Generator Setup functions acti- vate and the following features are available. 1. Recording/playback of external or internally generated time code 2.

  • Page 8: Editing The Internal Generator Timecode

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) <How to record time code> After setting the time code recording mode de- scribed above, record timecode by the following procedure. CLOCK ∞ ∞ 1. Press the [EDIT] key while holding down the [SHIFT]...

  • Page 9: Editing The Chase Offset

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) 3. Use the [JOG] dial to trim the chase offset value. Editing the chase offset By rotating the [JOG] dial, you can trim the chase offset value in real-time in subframe accuracy.

  • Page 10: Chase Sync To External Timecode

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Chase sync to external timecode The recorder with the Model 8345 installed can synchronize to incoming LTC by receiving the external LTC via the recorder's TIME CODE INPUT terminal and setting the recorder's slave mode to...

  • Page 11: Synchronization To Word Clock Or Video Signal

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Synchronization to word clock or video signal The recorder with the Model 8345 installed can synchronize to an external sync signal such as word clock and video composite signal.
  • Page 12 APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) ANALOG INPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBV ] ANALOG INPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBv ] ANALOG OUTPUT BALANCE [ +4dBu ] / UNBALANCE [ -10dBv ]...

  • Page 13: Contorl From A Video Editor (Rs-422)

    APPENDIX (Operation manual for the recorder with the Model 8345 TC/SYNC card installed) Control from a video editor (RS-422) The recorder with the Model 8345 installed can be used for audio editing for video using a video editor. Connect a video editor to the recorder's REMOTE IN (RS-422) terminal, as well as connect a video sync signal to the recorder, video editor and VTR as the reference signal.

Table of Contents