Connection; Connection Diagram; Using The Iso Connector - Hyundai H-CMD2062G Instruction Manual

Connection

Connection diagram

Subwoofer
(black wire with blue head)
Line output rear left
(black wire with white head)
Line output rear right
(black wire with red head)
Line output front left
(black wire with white head)
Line output front right
(black wire with red head)
Fuse (15 A)
ISO connector

Using the ISO Connector

1. If your car is equipped with the ISO
connector, then connect the ISO connectors as
illustrated.
1.
Installation/Connection
Video out
(black wire with yellow head)
Audio output right
(black wire with red head)
Audio output left
(black wire with white head)
Camera
(black wire with yellow head)
Parking wire (brown)
Reverse (pink)
Key1 (white)
SW ground (black)
Key2 (red)
TV antenna
(black wire with black head)
Radio antenna
GPS antenna input (option)
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection
may cause serious damage to this unit.
2.
Cut the connector, connect the colored leads
of the power cord to the car battery as shown
in the colour code table below for speaker and
power cable connections.
7