Changing The Insect Mesh; Changing The Insect Mesh At The Back - Vorwerk TM5 Instruction Manual

CHanGInG THE
pROTECTIOn GRID
Accessory in selected countries
Changing the protection grid at the back
Disconnect the Thermomix
by lifting it from the clips at the recessed grip 2 . You will now see the back
with the ventilation slits 3 . Take the protection grid
of the Thermomix
®
for the back 4 and insert it. It fits snugly over the ventilation slits 5 . The
ventilation grille can now be reattached. Carefully press it into the clips
until it locks entirely in place. Never operate your Thermomix
ventilation grille 6 . Check the protection grids for stains every time you
clean your Thermomix
®
2
5
from the mains. Remove the ventilation grille
®
from the outside.
3
6
without the
®
4
Changing the protection grid 49