Volume Operation; Charging Your Smartphone - Otone Soundship Micro User Manual

User Manual
4.Once your speaker has been paired successfully it will automatically attempt to pair with your
audio device each time you pop open and power on your speaker.
Note: If your audio device is not in range or the Bluetooth is switched off
then the speaker will revert to pairing mode and you can pair it with an
alternative device.

Volume Operation

1. Press the V+ Key to increase the volume.
2. Press the V- Key to decrease the volume.
3.5mm stereo line-in mode
Soundship Micro also offers an 3.5mm AUX line-in jack for use with audio
1.
devices not equipped with Bluetooth.
Simply plug one end of your 3.5mm cable to your audio device and the other
2.
end to the speaker.
3.
Line-in mode will take priority over Bluetooth mode, to return to Bluetooth, just
unplug the 3.5mm cable.

Charging your Smartphone

1. Soundship Micro has been specifically designed to dock Galaxy S3 and S4
devices, it will also work with other devices if they have centrally located
Micro USB connector and fit into the docking area.
2.
To use your speaker to charge for your Smartphone, extend the USB cable
from the rear of the speaker, connect it to the mains/USB power adaptor
then plug the adaptor into a mains power socket.
3.
Now simply dock your Smart p hone onto the Micro USB connector, the
device will start to charge.
5