Table of Contents
Advertisement
User Manual
Package Contents
Remove all of the components and accessories from the carton packaging. Make sure all of the
items listed below are present:
Speaker unit
Mains/USB power adaptor
3.5mm Stereo cable
If for any reason any of the items are missing or damaged, please contact Otone Audio Ltd
Service & Support, details can be found at: www.otoneaudio.co.uk/service_and_support
Getting Started
Set Up
Soundship Micro Dock has been designed to be as simple as possible to use.
Switching on and Connecting to Bluetooth
1. To power on the speaker, simply push through the central green section; this will pop out
the stand at the rear and also expose the Micro USB dock connector.
2. The speaker will automatically power on and go into Bluetooth discovery mode, this is
indicated by a flashing blue light on the front of the speaker.
3. To pair the speaker to your Smartphone or other Bluetooth enabled audio device, ensure
that your device has Bluetooth switched on (you may need to go into your device settings to
switch this on).
Next, using your phone settings, 'Scan for devices'. This will list all available
Bluetooth devices in the local area.
Choose Soundship Micro from the menu and press 'Pair'
There should be no need to enter a passcode, Soundship Micro will pair
automatically. However, if your device does ask for a code the default is 0000.
You phone will display 'Connected' once the speaker is paired and the blue light
on the front of the speaker will stop flashing and remain a solid blue colour.
Neoprene travel case
User manual
Warranty card
Advertisement
Table of Contents
