Installation And Connection - Beko HIC64100 User Manual

Installation and connection

NOTICE
Risk of broken glass!
Do not put the ceramic hob down
on a corner or edge.
NOTICE
Material damage!
The door and/or handle must not
be used for lifting or moving the
appliance.
• For installation the appliance must
be connected in accordance with
all local gas and/or electrical
regulations.
Connection to the mains supply
Important
This appliance must be
earthed!
Our company shall not be held
responsible for any damage
caused by using the appliance
without an earthed socket.
DANGER
Risk of electric shock, short
circuit or fire by unprofessional
installation!
The appliance may be connected
to the mains supply only by an
authorized qualified person and
the appliance is only guaranteed
after correct installation.
DANGER
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or
come into contact with hot parts
of the appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
• The mains supply must
correspond to the data specified
on the rating plate of the appliance.
The rating plate can be seen when
the front door is opened.
• The mains supply data must
correspond to the data specified
on the rating plate of the appliance.
The rating plate is located at the
rear housing of the appliance.
• The appliance mains cable must
correspond to the specifications
and the power consumption; see
Technical specifications, page 5.
DANGER
Risk of electric shock!
Before starting any work on the
electrical installation, please
disconnect the appliance from
the mains supply.
1. If no all-pole separation from the
mains supply is possible, a
separation unit must be connected
with a contact distance of 3 mm
min. (fuses, line safety switches,
contactors) all poles which should
be adjacent to (but not above) the
cooker in accordance with IEE
regulations. Failure to observe this
instruction may result in operational
10 | EN