Setting The Wc-603-101 Brew Timer; Setting Timer Wc-603Rds; Rough-In Drawing - Curtis GEM-120A Service Manual

Gem-120a satellite brewer

Hide thumbs Also See for GEM-120A:

Table of Contents

GEMINI 120A

SETTING THE WC-603-101 BREW TIMER

Adjustment of the timer is made on a calibrated dial with a range from 0 to 100.

This is a range of 2 to 20 minutes. The front control panel has a brew selector

switch marked FULL and 1/2.

To change the setting, flip the brew selector switch to FULL. Locate the brew

timer, inside the top cover. Rotate timer arrow to the right to increase the brew

time, rotate to the left to decrease the brewing time. The indicator dial is normally

set pointing at 25. This setting is intended to deliver one gallon of water (brew 24

cups) per brew cycle. To brew ½ gallon, flip the brew selector switch to 1/2.

This timer is the previous version of the WC-603-101,

above. The timer is mounted inside the upper com-

partment with the brew selector knob protruding from

the center of the front panel (see illustration, left). The

brewer is designed to brew 24 cups (one gallon maxi-

mum). Adjustment of the timer is made on the timer

calibration dial. The knob indicator must be set at the

480 second mark on the dial. On the front panel, the

brew selector switch should be at 2. This setting will

deliver one gallon of water (brew 24 cups) per brew

cycle. To brew 12 cups, simply turn the brew selector

knob to 1. If finer adjustments are needed, rotate timer

knob to the right to increase the brew time, rotate to

the left to decrease the brewing time.

- 3 -

Table of Contents