Tv Channel Presetting - JVC AV-21R318 Instructions Manual

TV channel presetting

To register the TV channels automatically
(AUTO PROGRAM)
You can register the TV channels automatically.
1
MENU SET UP menu
2
AUTO PROGRAM
22%
or
OK /
3
to stop or when AUTO PROGRAM finishes.
4
The EDIT menu appears.
To edit the channel list Proceed to Step 2 of "To edit the channel list" on this
page.
If a channel is not Proceed to Step 3 of "To register the TV channels
registered manually" on this page.
To exit the menu Press the MENU button.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV's channel list manually.
1
MENU SET UP menu
2
or
3
Choose the channel which you want to register.
4
(blue) to activate the MANUAL function. (The sound system of
the channel appears at the right of the CH/CC number.)
5
to choose an appropriate sound system.
For details, see "SOUND SYSTEM". \ Page 12
AUTO PROGRAM
: EDIT
EDIT/MANUAL
6
OR
(red)
7
Searching stops when a channel is found and displayed.
If the reception is Press the yellow or blue button to fine tune the TV
poor channel.
Press the 3 button to choose an appropriate sound
If noisy sound is
heard system.
8
to exit.
To edit the channel list
(MOVE, DELETE and INSERT in the EDIT menu)
You can edit the TV channel list as you like.
After this operation, other channel's PR number will be changed.
1
Repeat Steps 1 and 2 of "To register the TV channels manually
(MANUAL in the EDIT menu)", \ see left.
2
Choose the channel which you want to change its PR number, or
delete, or register a new channel.
3
Press the 3 button. Then move it to the new PR number
To change the
you want to use for the channel by pressing the 5/∞ button.
PR number
Finally press the 2 button.
(MOVE)
To delete Press the yellow button.
the channel
(DELETE)
To add the If you add a new TV channel of NTSC-M system, press the
new channel SOUND SYSTEM button to change the sound system to M,
(INSERT) then select EDIT/MAMUAL in SET UP menu. Press the green
button, then press the 3 button to choose "CC" or "CH".
Enter the CH/CC number for the channel you wish to add.
The TV starts to search for the channel.
When a TV channel has already been registered in PR99,
using the INSERT function deletes that TV channel.
4
to exit.
(green) to search for the TV channel.
15