Idle Speed - Honda NSR 150 SP Owner's Manual

IDLE SPEED
(Refet to the maintenance precaution on
page 58)
The idle speed adjustment procedure given
here should only be used when changes in
altitude affect normal idle speed as set by
your dealer. See your authorized Honda
dealer for regularly scheduled carburetor
adjustments, including individual carburetor
adjustment and synchronization.
NOTE:
• The engine must be at normal operating
temparature for accurate idle speed
adjustment. Ten minutes of stop-and-
go riding is sufficient.
1. Warm up the engine, shift to neutral and
place the motorcycle on its stand.
2. The throttle stop screw (1) is behind the
seal rubber in the left side cover.
Push in the rubber.
68
3. Adjust idle speed with the throttle stop
screw (1).
Idle speed (In neutral):
1,300 ± 100 rpm
(1 )
II '\'
, /
/
o
(1) Throttle stop screw (A) Increase
(8) Decrease