Turning On Your Tv For The First Time - Sharp LC-32LB261U User Manual

Turning on your TV for
the first time
The first time you turn on your TV, the EZ SETUP
wizard opens. The wizard guides you through setting
up basic settings including the menu language, time
setting, picture mode, TV signal source, and channel
list.
1 Make sure that you have:
• Installed the remote control batteries. (See page
36 for details.)
• Connected an antenna, cable TV, or satellite TV.
(See page 13 through
• Connected the power cord. (See page
details.)
2 Press (power) to turn on your TV. The Please
select your language screen opens.
3 Press or to highlight the language you want,
then press ENTER. The time setting screen opens.
4 Press or to highlight Mode, then press
access the setting.
5 Press or to select Manual (to set the date and
time manually) or Auto (to set the date and time
automatically from a TV signal source based on
the time zone you select), then press ENTER,
MENU, or .
Note
If you select Auto, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.
18 for details.)
35 for
to
LC-32LB261U Sharp 32" LED TV
6 Press or to highlight Time Zone, then press
to access the setting.
7 Press or to select your time zone. You can
select Eastern, Central, Mountain, Pacific,
Alaska, Hawaii, Atlantic, or Newfoundland, then
press ENTER, MENU, or .
8 Press or to highlight Daylight Saving, then
press to access the setting.
9 Press or to select On (if your viewing area
observes Daylight Saving Time) or Off (if your
viewing area does not observe Daylight Saving
Time), then press ENTER, MENU, or .
10 If you selected Manual for Mode:
• Press or to highlight Year, Month, or Day,
then press to access the setting. Press
to adjust the setting, then press ENTER.
• Press or to highlight Time, then press
access the setting. Press
hour, minute, or AM/PM field, then press
to adjust the setting. When you are finished,
press ENTER.
11 When you have finished setting the time, press
ENTER. The What is your viewing environment
screen opens.
12 Press or to highlight Home or Store, then
press ENTER.
If you selected Store mode, a message asks if you
are sure you want this mode. Select Yes to
continue using Store mode or select No to change
your selection, then press ENTER. Store mode is
not an energy savings mode and displays a retail
banner.
The Please select your tuner mode screen opens.
or
to
or to highlight the
or
37