Hitachi R-S57YMJ How To Use Manual page 13

d" is all it is. Please follow the
5cm above
Minimum of 1cm or
above on both side
The refrigerator can be connected
to an exclusive wall outlet soon
after it is installed.
Connected to an exclusive wall outlet.
Power 110V Rated 15A or more.
If you wish to install the refrigerator in a hot spring area exposed to sulfide gas, you may need to apply anti-rust treatment
to the piping. Contact your dealer in advance. Failure caused by gas damage will not be covered under guarantee.
R-SF60YMJ (D).indd 13
To prepare for an earthquake
Pass the belt through the handles (in two places) on the
back and fix the refrigerator to the sturdy wall and poles.
Four screws supplied
We recommend using a safety belt to guard against the risk of the
Belt
refrigerator overturning.
"Safety belt against overturning for refrigerators" (option) Part number
R-826CV 300 x 2. Contact your dealer for details.
About Grounding
It is recommended to ground the refrigerator to prevent possible electrical
shock and noise interference.
Make sure to ground the appliance especially in the following places.
When there is an earth terminal
Connect the earth wire to the earth connection screw on the lower left of
the rear surface (
"Earth wire (2.5m)" (accessory) Part No. NW-60R6 052.
When there is no earth terminal
Consult with your dealer for grounding (Type D grounding, to be charged).
When installing the refrigerator in a particularly
damp place
It is mandatory to install an earth leakage circuit breaker as well
as grounding. Consult with your dealer for further information.
Screws
Earth terminal
Earth line
(Copper wire with diameter
of 1.6mm)
1.6mm
2
R-826CV 300 × 2
Damp place such as earth floor or wash place.
Humid place such as basement.
mark) and the earth terminal on the power outlet.
2.5m
Must not connect
Water pipe (Danger of electric shock)
Gas pipe (Danger of explosion)
Telephone line or the earth of lighting rod
(Danger when lighting)
(Continue)
NW-60R6 052
13
3/25/09 9:57:25 AM