Table of Contents
Advertisement
GETTING STARTED
Setting ports
Serial ports A and B
The data speed, format and flow control for the
RS-232 serial ports A and B
are set up as follows:
1
Open the MENU and
scroll down to Ports:
See Overview for
available choices.
2
Select the parameter
to be set for Port A:
3
Select the listed data
Speed 115200 bps
(default):
4
Select listed format:
8 data bits, no parity and
1 stop bit (default)
5
Set flow control to rts/
cts (default):
Nera F33
Port B driver switch
Select data speed, format and flow control as de-
scribed for serial port A.
Switching the driver from
RS-232B to RS-422:
6
and
OK
scroll down to Port B:
7
switch function:
OK
and
scroll down to RS-422:
OK
The RS-422 terminal
block is now activated for
connection of e.g. PC using cables of up to 100 m.
The RS-232 serial port B is disconnected.
OK
For information on NMEA port, see
input sources
OK
For information on Compression, see
Applications > Data Compression
HANDSET FUNCTIONS
Select Serial Ports:
Open the Driver
later in this manual.
'
CONT
D
OK
OK
OK
NMEA-0183
on the CD.
27
Advertisement
Table of Contents
