Important Safety Precautions And Explanation Of Symbols - Emotiva XMC-1 User Manual

Important Safety Precautions and Explanation of Symbols

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
!
installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, configure, or operate the Emotiva
XMC-1. After successful installation and configuration of the XMC-1, be sure to retain this manual in a safe
place for future reference.
Safety is a key component of a long lasting and trouble free installation. Please read and follow all
instructions and heed all warnings on the XMC-1 and in this manual. The vast majority of the subsequent
safety precautions are common sense. If you are not comfortable with the installation of audio/video
entertainment equipment, you should seek the services of a qualified installation professional or call us for
help.
WARNING: To REDUCE ThE RIsk of fIRE oR ElECTRIC shoCk, Do NoT UsE ThE XMC-1 NEAR WATER
!
oR IN WET loCATIoNs, Do NoT EXposE IT To RAIN oR MoIsTURE, Do NoT EXposE IT To DRIppING
oR splAshING fRoM oThER soURCEs, AND ENsURE ThAT No oBJECTs fIllED WITh lIQUIDs (sUCh
As VAsEs) ARE plACED oN IT. DoING so MAy REsUlT IN DAMAGE To ThE XMC-1 AND ThE RIsk of
ElECTRIC shoCk, WhICh MAy REsUlT IN BoDIly INJURy oR DEATh.
WARNING: To REDUCE ThE RIsk of ElECTRIC shoCk, Do NoT REMoVE ThE CoVER fRoM ThE
XMC-1. ThERE ARE No UsER-sERVICEABlE pARTs INsIDE ThE XMC-1. REfER All sERVICE To
QUAlIfIED sERVICE pERsoNNEl.
Do not install the XMC-1 near or above any heat sources such as radiators, heating vents, or other apparatus'
that produce heat. Do not block any ventilation openings or heat sinks. Avoid installing the XMC-1 directly
above other heat-producing equipment unless sufficient ventilation or forced-air cooling is provided.
Do not install the XMC-1 in locations without proper ventilation. The XMC-1 should not be operated on a bed,
sofa, rug, or similar surface that may block vents. The XMC-1 should not be installed in an enclosed location
such as a bookcase, cabinet, or closed equipment rack unless sufficient forced-air ventilation is provided.
Always install your XMC-1 according to the manufacturer's instructions and only use attachments or
accessories specified by the manufacturer.
Do not install the XMC-1 on any stand, shelf, or other piece of furniture that is unable to support its weight. If
a cart is used to move the XMC-1, use caution to avoid injury from tip-over.
Connect the XMC-1 only to power sources of the correct voltage (as shown in this manual and on the XMC-1).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially careful
where the power cable enters the power outlet and the XMC-1 unit.
Only connect the XMC-1 to an electrical outlet or extension cord of appropriate type and rating.
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or using unsafe
adapters. A polarized plug has two blades - one wider than the other. A grounding plug has a third ground
prong in addition to the two main conductors. The wide blade or third grounding prong is provided for your
safety. If the provided plug does not fit your outlet, consult an electrician to replace your obsolete outlet. If
you replace the power cord on the XMC-1, only use one of similar type and equal or greater current rating.