Histogram And Other Screen Displays; Protecting Photos - Canon DC310 Instruction Manual

Protecting Photos
(OJ 21)
[FUNC.]
e
[C>n
PROTECT]
C
Press
@
[ . PROTECT]: The image selection
screen appears.
FUNC.
(aJ
22)
• All displays off
1
However, the markers and the
0
icon and
AF
frames when the autofocus is locked will
still appear on the screen.
You can protect still images recorded on
the memory card from accidental
erasure.
Shadows
<:====>
Highlights
When viewing still images you can
display the histogram and the icons of
all the functions used at the time of
recording. Use the histogram as a
reference to verify the correct exposure
of the still image.
The area to the right of the histogram
represents highlights and the left side
represents shadows. A still image
whose histogram skews to the right is
relatively bright; while one whose
histogram peaks to the left, is relatively
dark.
Histogram and Other Screen Displays
CD
NOTES
The histogram will appear also after
recording a still image, while reviewing it .
within the time set for the [REVIEW] option
(or immediately after recording it, if
[REVIEW] is set to [ . OFF]). You can
choose to turn off the histogram by
pressing
[DISP.].
I
To
SELECT THE ON-SCREEN DISPLAYS
Repeatedly press
[DISP.1
to turn the on-
screen displays on and off in the
following sequence.
~_mi.
• All displays on
• All displays off
1
~._ ... : . 2'!_:~
i.'.:/t,_n
• All
displays on
• Regular displays only (removes the
histogram and information icons)
I
FROM THE IMAGE SELECTION SCREEN
1 Select (....
~
) the still image you
want to protect.
2 Press
@
to protect the still image.
IQiI
appears on the bottom bar and
the image cannot be erased. Press
@
again to cancel the image
protection.
3 Repeat steps 1-2 to protect
additional images or press
r=[F,-;-:UNC":-:C"....,.]
twice to close the menu.
o
IMPORTANT
Initializing the memory card
(OJ
59) will
permanently erase all recorded still images,
even the protected ones.
58 • Photos