Changing The Time Zone; Opening The Lens Cover And Adjusting The Lcd Screen - Canon DC310 Instruction Manual

You can rotate the panel 180 degrees
toward the lens (allowing the subject to
monitor the
LCD
screen while you use
the viewfinder). This is the only case
where you can use the viewfinder and
the LCD screen simultaneously.
Rotating the LCD panel 180 degrees
can be useful when you wish to include
Open the LCD panel 90 degrees.
You can rotate the panel 90 degrees
downward.
Move the lens cover switch down to
C
to open the lens cover.
Rotating the LCD Panel
Before you start recording, open the
lens cover.
Opening the Lens Cover and Adjusting
the LCD screen
Once you have set the time zone, date
and time, you do not need to reset the
clock every time you travel to another
time zone. Select the time zone to
match the local time at your
destination, referring to the date and
time displayed on the screen.
1
Open the date and time setup
screen.
[FUNC.]
E) [& MENU] E)
[169
DATEffIME SETUP] E)
[T.ZONE/DST]
2
Move the orange selection frame
(T) to the
~
time zone.
3
Select
(~~)
the area that
corresponds to the local time at
your destination and press
@.
• Refer to the changing date and
time displayed on the screen.
• To adjust for daylight saving time,
select the area name marked with
a
*.
4
Press
[FUNC.]
to close the menu.
World Time Zones
[FUNC.)
~
[ . MENU] €)
[169
DATEffIME SETUP]
0
[T.ZONE/DST] €)
Desired time zone* €)
[r=F:-:-:UN: - : - : C =->. j
*
To adjust for daylight saving time, select the
area name marked with a
~+;.
FUNC.
(IJJ
22)
Change the time zone to match your
location. The default setting is New
York.
Changing the Time Zone
Preparations •
25