Tv Channel Presetting - JVC AV-21MS15 Instructions Manual

TV channel presetting

To register the TV channels automatically
(AUTO PROGRAM)
You can register the TV channels into the TV's channel list
automatically.
1
Display the INSTALL menu.
❇
MENU INSTALL menu
2
Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR LIST) automatically.
3
The EDIT menu appears.
To edit the channel Proceed to the Step 3 of "To edit the channel
list list (PR LIST)" on page 20.
If a channel is not Proceed to the Step 3 of "To register the TV
registered channels manually" on this page.
To exit the menu Press the MENU/OK button.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV's channel list manually.
1
Display the INSTALL menu.
❇
MENU INSTALL menu
2
Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
EDIT
PR
AV
I
1
I
2
I
3
I
4
5
6
MENU : OK
MOVE
3
Choose the channel which you want to register.
4
Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH//CC number.
Press the 3 button to choose an appropriate sound system.
5
For details, see "SOUND SYSTEM" on page 14.
6
Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7
Repeat step 5 until your desired TV channel appears.
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
8
Press the MENU/OK button to exit the menu.
❇ About the basic operations of the menu, please see the "How
to operate menus and menus locations" on page 5.
CH/CC
CH 04
CH 76
CH 78
CH 05
3
CH 28
CH 10
IINSERT
IDELETE
IMANUAL
19