Using The Audio Mix Function; Using Mirrorlink - Pioneer AVH-X7700BT Owner's Manual

iPhone or smartphone applications
 Setting the keyboard language with the application for iPhone
on page 35
Displaying the image of your
application
You can set an image of an application for your device, which
is not compatible with [AppRadioOne], to be shown on the
screen.
p Depending on the type of application, you may not be able to
see the image on the screen.
p When you use this function on iPhone with Lightning con-
nector, do not connect other devices via Bluetooth wireless
technology.
p You can only control the application on the connected
device.
p When you touch the display in this function, "Don't Touch"
mark appears on the upper right corner of the screen.
1 Connect your device.
 iPhone with 30-pin connector on page 49
 iPhone with Lightning connector on page 49
 Android device compatibility on page 17
™
2 Press .
3 Touch [APPS].
When the application is ready to launch, messages appear on
the screen of this product and your iPhone.
 For iPhone with 30-pin connector user, refuse to
launch the application on your iPhone and then
touch [OK] on this product.
4 Launch the application on your device.
An image of the application appears on the screen.
p Press to return to the Top menu screen.

Using MirrorLink

When you connect a MirrorLink device with compatible applica-
tions installed, you can control the applications for the mobile
device directly from this product (MirrorLink mode).
You can view and operate the compatible applications via the
display with multi-touch gestures like tapping, dragging, scroll-
ing, and flicking.
p Multi-touch gestures may be disabled depending on the
MirrorLink device model that is connected.
Starting procedure
When connecting a MirrorLink device to this product, you
must select the method for connecting your device. Settings are
required according to the connected device.
 Setup for iPod / iPhone or smartphone on page 17
1 Unlock your MirrorLink device.
2 Connect your MirrorLink device to this product
via the separately sold USB interface cable for
use with MirrorLink devices (CD-MU200).
 MirrorLink device compatibility on page 17
3 Press .
4 Touch [APPS].
If the launcher application is installed in the MirrorLink device,
the application launches.
If not, the Application menu screen will appear.
5 Touch the desired application icon.
The desired application is launched, and the application opera-
tion screen appears.
p Some applications may not launch depending on the state
of the connected device. If it does not launch, launch the
application according to the application startup message.
p Press to go back to the Top menu screen.

Using the audio mix function

You can output audio mixing AV source and an application for
iPhone or smartphone when the AppRadioOne or MirrorLink
mode is used.
1 Start up the AppRadioOne or MirrorLink mode.
2 Press the Volume (+/–) button.
The audio mix menu will be displayed on the screen.
Radio
Mute
Vol.
1
1 Touch to mute. Touch again to unmute.
2 Sets whether to switch the sound mix function off.
3 Adjusts the application audio volume.
Each touch of [+] or [–] increases or decreases the volume
level.
p The AV operation screen and the Application screen can
be switched by pressing
p You cannot adjust the volume of the main sound on the
screen. Press the Volume (+/–) button to adjust the
volume of the main sound.
App
2
OFF
12 3
Vol.
21 48
6/10
10
.
29