Table of Contents
Advertisement
Introduction
This manual explains the installation and maintenance instructions for the water Factory Systems'
N4000, N54500, N5000 Series Reverse Osmosis (RO) Drinking Water Appliances. Please read each section
of this manual carefully. The specific model chosen should be appropriate for the local water conditions and
the customer's needs. Check the Performance Data Sheet which specifies performance characteristics and
the conditions of use.
The Water Factory Systems' undercounter RO drinking water appliances are designed to connect per-
manently to a home plumbing system. To ensure the installation conforms to your state and local plumbing
codes, it is recommended that the installation be performed by a qualified specialist for RO drinking water
appliances or a licensed plumber. Failure to install as instructed will VOID the warranty.
Caution: The RO membrane cartridge is shipped with a preservative solution inside. Make sure to
flush it thoroughly as directed before first use.
© 1995, CUNO/Water Factory Systems. All material herein may not be produced or copied in any manner without the expresse written consent of the publisher.
Table Of Contents
A. Determine the appliance location
D. Install the feed water valve and tubing
K. Install purification assembly and storage tank
P. Cleanup, paperwork, and customer orientation
Installation diagrams, (Figures 1-6)
Operation & Maintenance Instructions
Important water quality assurance requirements
Replacing the filter cartridges
Replacing the RO membrane cartridge
Sanitizing the RO appliance
2
Advertisement
Table of Contents
