Table of Contents
Advertisement
Feed Water Valve Installation (Fig. 3)
Nut/Seal
Piercing
Lance
For 3/8" OD tubing use side
of bracket with projections.
Drain Connection Installation (Fig. 4)
NEVER MOUNT HERE
NOTE: Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain connections. The
use of saddle-type valves are prohibited in: Alaskas, Delaware, Idaho, Kentucky, Massachussets, Michigan, Minnesota,
New Hampshire, North Dakota, Oregon, and South Dakota. Chack your local plumbing codes for any restrictions that apply.
Massachusetts CMR 248 strictly prohibits the use of saddle type valves. The feed water connection must conform to applicable
plumbing codes.
(Important: See note on state requirements below.)
Plastic Sleeve
Compression Nut
1/4" Orange Feed
Water Tubing
Insert
For 7/16" - 1/2" OD tubing or
rigid pipe use "V" side of bracket.
Hole should be located
on top of the pipe.
Mount drain saddle
at either location.
Drain Saddle Elbow
Drain Saddle
Drain Connection
(horizontal example)
11
Advertisement
Table of Contents
