Table of Contents
Advertisement
How To Use 'Push-In' Connectors (Fig. 6)
This product is outfitted with user friendly "Push-
In connectors. Proper use of the connectors is
shown in the diagrams.
It is most important that the tubing selected for
use with these connectors be of high quality,
exact size and roundness, and with no surface
nicks or scratches. If it is necessary to cut the
tubing, use a plastic tubing cutter or sharp
razor knife. Make a clean square cut.
Should a leak occur at a "Push-In" connector,
the cause is usually defective tubing.
To fix: • Relieve pressure.
• Release tubing.
• Cut off at lease 1/4" from end.
• Reattach tubing.
• Confirm connection is leak free.
Faucet Installation (Fig. 5)
Chrome Base Plate
Rubber Washer
Slotted Washer
Spacer
Threaded Nipple
Flat Washer
Hex Nut
3/8" Faucet Adapter
Blue 1/4" Product
Water Tubing
Air Gap Hole
1/4" Standard
Green Tubing
Black 3/8" Reject
Tubing To Drain
Push-In Tubing Connector
Grey Collet
2
Tubing is secured in position.
Special Red
"SFC" Tube
From RO
Blue 1/4" Product
Water Tubing
To Attach Tubing
1
Grey Collet
Tube
Tubing is secured in position.
To Release Tubing
3
Push in grey collet to release tubing.
12
Advertisement
Table of Contents
