Specifications - Makita UC120D Instruction Manual

ENGLISH

SPECIFICATIONS

Chain speed per minute (min
Length of guide bar
Saw chain
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear eye protection.
･
Wear ear protection.
･
Wear a helmet, goggles and ear
protection.
･
Use appropriate protection for foot-leg
and hand-arm.
･
Do not expose to rain.
･
Hold the saw with both hands while
working! One-handed use is extremely
hazardous!
･
This saw is to be used by properly
trained operators only.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting branches.
Model
-1
)
Type
Pitch
No. of drive links
Overall length
Net weight
Rated voltage
equipment and
environmentally compatible
END005-2
For European countries only
Noise
Measured sound power level: 90 dB
Guaranteed sound power level: 94 dB
Measured according to Council Directive 2000/14/EC.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-13:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Vibration
The vibration
determined according to EN60745-2-13:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 2.6 m/s
EC-DECLARATION OF CONFORMITY
Model; UC120D
We declare under our sole responsibility that this
product is in compliance with the following standards of
its standardized documents;
EN60745,
Directives, 2004/108/EC, 98/37/EC, 2000/14/EC
Certificate of adequacy of the technical file with respect
to 98/37/EC having been obtained from the following
notified body:
Intertek SEMKO AB, Torshamnsgatan 43, Box 1103,
ENE031-2
SE-164 22 Kista, Sweden
000230
2
UC120D
160 m/min.
115 mm
25 AP
1/4"
42
468 mm
2.2 kg
D.C. 12 V
) : 80 dB(A)
pA
Wear ear protection.
total value (tri-axial
) : 8.5 m/s
h
2
EN55014 in accordance
CE2007
Tomoyasu Kato
ENG029-2
ENG101-1
ENG221-1
vector sum)
2
ENH017-6
with Council