Removing The Accessories - KitchenAid 9KHM92 Instructions Manual

SETTING UP YOUR HAND MIXER HAND MIXER INSTRUCTIONS
C
Paired accessories (beaters, optional dough
hooks) include one accessory with a collar
(D), and one without (C). Single accessories
come with a collar (D) (liquid blending rod)
or without (C) (whisk).
A
Insert the accessory without a collar (C)
3
into the smaller opening (A). Align and
push to lock into place.

Removing the accessories

If the Hand Mixer is running, stop
1
the Hand Mixer by sliding the Power
switch to the "O" (Off) position. Then,
unplug the Hand Mixer from the
electrical outlet.
6
D
Insert the accessory shaft with the collar
2
(D) into the larger opening (B) of the
Hand Mixer. Align the flanges on the
shaft with the slots in the opening. Push
to lock into place.
NOTE: An accessory shaft without a collar
may be used in either opening (A or B). Those
with a collar may only be used in the larger
opening (B).
B
Press the Ejector Button to release
2
the accessories from the Hand Mixer,
then remove them.
B
D