Table of Contents
Advertisement
Example:
~rn
CLEAR
III ···· ....
·c1ears a single program
~[1)
CLEAR A
lID
·········c1ears all programs in all areas.
5-6-17 Option Specifications
• Cassette Magnetic Tape
In order to record programs or data stored in th is un it on a cassette tape with the PCA,
use the PC-4 cassette interface and an ordinary tape recorder. If the tape recorder has a
remote terminal, remote control can be conveniently controlled from the PC-4 through
the Cassette Interface.
For tape recorder connection procedures and detailed operating procedures, refer to the
PCA Cassette Interface operation manual.
•
Program recording
Format: SAVE ["filename"]
(Item in brackets may be omitted.l
The filename may be composed of alphabetical letters, numbers, symbols, enclosed in
quotation marks and contain up to 8 characters.
Example:
"ABC"
"NO.1'!
This command starts the tape recorder in the RECORD position.
Operation:
SAVE
["filename"]
II
A SAVE command can only be used manually.
•
Program callout
Format: LOAD
["filename"]
(Item in brackets may be omitted.)
This command starts the tape recorder in the PLAYBAC K position.
Operation:
LOAD
["filename"]
rEI
Display during program load
'-I '--I
Program file
filename
A program that has been written in a designated area will be erased starting with the
initial Iine number of the program to be loaded if a call out is performed.
-58-
Advertisement
Table of Contents
