To start the registered program
Massage with registered setting will start after the body scanning.
●
When an unregistered course is selected, the standard automatic course massage is applied.
However, the "Heat" massage heads on/off settings, "Foot Heat" on/off settings, temperature settings
and volume settings registered to the USER button are applied. (See page EN30.)
To delete the registered settings
❶
●
Press
Press
to turn on
the power. Press the
the power. Press the
button you want to
button you want to
delete.
Press.
❶
◦
Press
power.
( When not massaging, the power is turned off automatically
❷
◦
if 3 minutes or more pass without operation.)
Select one of the USER
buttons that is registered.
●
Registered USER button will light. (Example:
❸
◦
Select and press one of the
automatic courses that is
registered using the USER
button.
(Example:
❷
●
Press again and
Press again and
hold for more than
hold for more than
3 seconds until the
3 seconds until the
button changes to
flashing.
Press and hold for
more than 3 seconds.
to turn on the
Press.
(Example: "SWEDISH" )
)
❸
●
Press again
Press again
during the button
during the button
flashes (about
flashes (about
10 seconds).
Press.
Delete is completed
once the flashing stops.
)
EN31